Safety Awareness - Artic UV Serie Manual De Instrucciones

1. Safety Awareness

VERY IMPORTANT!
Please do not install or use your portable air conditioner before you have carefully read
this manual. Please keep this instruction manual for an eventual product warranty and for
future reference.
Warning
Do not use means to accelerate the defrosting process or to clean, other than those re-
commended by the manufacturer.
The product shall be stored in a room without continuously operating ignition sources (for
example: open flames, an operating gas product or an operating electric heater.
Do not pierce or burn. Do not disassemble the unit.
Be aware the refrigerants may not contain an odour.
Product shall be installed, operated and stored in a room with a floor area larger than X m2.
MODEL
7000Btu/h
9000Btu/h
Warning (for R290)
Specific information regarding products with R290 refrigerant gas.
• Thoroughly read all of the warnings.
• When defrosting and cleaning the product , do not use any tools other than those re-
commended by the manufacturing company.
• The product must be placed in an area without any continuously sources of ignition (for
example: open flames , gas or electrical products in operation).
• Do not puncture and do not burn. Do not disassemble the unit.
• This product contains Y g (see rating label back of unit ) of R290 refrigerant gas.
• R290 is a refrigerant gas that complies with the European directives on the environ-
ment. Do not puncture any part of the refrigerant circuit.
• If the product is installed, operated or stored in an unventilated area, the room must be
designed to prevent to the accumulation of refrigerant leaks resulting in a risk of fire or
explosion due to ignition of the refrigerant caused by electric heaters, stoves, or other
sources of ignition.
• The product must be stored in such a way as to prevent mechanical failure.
• Individuals who operate or work on the refrigerant circuit must have the appropriate
certification issued by an accredited organization that ensures competence in handling
refrigerants according to a specific evaluation recognized by associations in the indus-
try.
• Repairs must be performed based on the recommendation from the manufacturing
20
X (m2)
4
12