Recommendations For Use - Moulinex A320R1 Manual De Instrucciones

USING THE CHOPPER BOWL
• Place the motor block (A) on a flat, stable, heat-
resistant work surface.
• Do not plug your appliance in yet.
• Place the chopper bowl (B) on the motor block
(A) (fig. 1).
• Place the blade (C) inside the bowl. Place the
blade on the central axis by pressing the white
button to lock it (fig. 2).
• Place the diced food in the chopper bowl.

RECOMMENDATIONS FOR USE

• Work in short bursts to obtain a fine, smooth
result. If pieces of food stick to the sides of the
bowl (meat, onions, etc.), remove them with the
spatula (F), spread them around the bowl and
press the lid 2 or 3 additional times.
• If pressing the lid does not make the appliance
INGREDIENTS
Parsley
Onions
Shallots
Garlic
Rusks
Almonds
Hazelnuts
Walnuts
Gruyere
Boiled egg
Meat (cut into pieces)
USING THE BLENDER BOWL (E) (*for A327 model only)
• Maximum operating time : 30 seconds.
• Place the bowl (E3) on a flat, stable, heat-
resistant work surface. All the operations must be
carried out with the bowl (E3) placed on a flat,
stable, heat-resistant work surface, never on the
motor block (A).
• Put the ingredients to be blended in the bowl
(E3) (fig. 5). Pour the liquids in first. Never exceed
the maximum level indicated (1.25 L).
• Put the lid (E2) on the bowl (E3) (fig.6).
• Put the stopper (E1) in its slot on the lid and turn
it to lock it (fig.7).
• Put the lid (D) on the chopper bowl (B) (fig.3).
Now you can plug your appliance in.
• Press on the lid (D) to start the appliance up
(fig.4).
• To stop the chopper, stop pressing on the lid: the
appliance switches off automatically.
• Do not remove the lid until the blade has
completely stopped.
• To remove the blade, press the white button
while pulling the blade upwards.
work, make sure that pieces of food are not
stuck on the inside edge of the lid in contact
with the bowl.
• After prolonged use, if the blade should
become blunt, replace it.
• After use, leave it to cool down for 2 minutes.
MAX. QUANTITY
20 g
150 g
150 g
60 g
20 g
200 g
200 g
150 g
150 g
200 g
200 g
• Place the blender bowl (E*) on the motor block
(A) (fig. 8).
• Plug the device in.
• To turn the appliance on: press on the sliding
ring on the blender bowl with your hand (fig. 9).
• To stop the appliance, stop pressing the ring.
• The cover and its stop must always be in
place properly when the appliance is
operating.
• Never place your fingers or any other object in
the blender bowl while the appliance is working.
5
TIME
6 s
9 s
9 s
5 s
5 s
8 s
12 s
10 s
10 s
5 s
6 s