Before Use; Setting Up The Product - LIVARNO Home HG06518 Instrucciones De Utilización Y De Seguridad

T o maintain splash protection of the product, this
product must not be used without all gaskets
and slide being properly installed.

Before use

Note: Remove all packaging materials from the
product.

Setting up the product

Connect the spike
13
Put the LED projector onto the spike
connect it by turning it counterclockwise (fig. D).
Insert the spike
13
or flower bed (indoor or outdoor) for it to be
stable (fig. D).
Note: For better projection performance, sug-
gest to place the product at least 1 meter away
from the projection surface (wall, ceiling, etc.).
Connect the round base
Put the LED projector onto the round base
and connect it by turning it counterclockwise
(fig. A). Then put the product on a flat surface.
Insert the connection plug
jector into the socket of the mains adapter
(fig. B).
Note: Lay the cable so that tripping is avoided.
Turn the union nut
fix the connection (fig. B).
Insert the mains adapter
socket. The product is ready to use.
Exchange the slide
Unscrew and remove the two screws
LED projector casing.
Remove the slide
10
While being careful to avoid touching the
slide film.
Put the the desired slide
and fixed it.
Ensure place the slide seal ring
the slide cover .
11
Ensure the screw seal ring
before tighten the two screws
12
:
and
13
deep into the ground, lawn
:
2
of the LED pro-
5
in clockwise direction to
4
into the mains
7
:
10
on the
12
by pulling the cover
11
in with right side
10
before place
9
still enclose screw
8
(fig. C).
12
Cleaning and care
Q
CAUTION! DANGER OF ELECTRIC SHOCK!
First pull the mains adapter
CAUTION! DANGER OF ELECTRIC SHOCK!
For reasons of electrical safety the product must
never be immersed in water.
D o not use any solvents, petrol or similar items.
This would damage the product.
C lean the product regularly with a dry, lint-free
cloth. Use a slightly dampened cloth to remove
more stubborn dirt.
Disposal
Q
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
Observe the marking of the packaging
materials for waste separation, which
b
a
are marked with abbreviations (a) and
numbers (b) with following meaning:
2
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
7
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal author-
ity for more details of how to dispose of
your worn-out product.
To help protect the environment, please
dispose of the product properly when it
out. has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
out of the mains socket.
7
GB/IE 11