Bartscher PRO II 40T Manual De Instrucciones Original página 44

o To clean the drain tap after use pour low amount of warm water into the coffee
machine and drain it through the tap.
o Before cleaning remove the base and the dtain
tray, pulling the water tank up.
o Wash the removed parts in warm water with
gentle cleaning agent. Rinse in clean water.
o Wipe the water tank exterior with soft, moist cloth.
o Finally dry all cleaned parts and surfaces with soft cloth.
Weekly cleaning
Fill level indicator
o Clean the glass pipe of the fill level indicator with included brush.
o First unscrew the indicator cover (a).
o Then remove the glass pipe (b).
o Remove the lower seal (b) from the glass pipe and
clean it with included brush.
o Finally reinstall the sel on the lower end of the glass
pipe and put the pipe in the level indicator holder.
o Tighten the cover (a) on the fill level indicator.
CAUTION!
Check if the glass pipe is correctly positioned in the holder.
Drain tap
o If the device is used daily, it is necessary to thoroughly
clean the tap mechanism once weekly, or less frequently
in case of less intensive use.
o To clean the drain tap unscrew the upper part with holder
(c). Clean the tap and connection between the tap and the
device with small bottle brush. Rinse the removed part of the
drain tap and reinstall in the device.
- 40 -
a
b
c