VR46 fun Hoverboard Manual Del Usuario página 7

Read the user manual carefully to fully understand how the product works, in order to use it in total safety.
2.1 Stages of use
• Stage 1. Turn on the device, press the power key for about 3 seconds until the green light turns on.
• Stage 2. Place one foot on the platform while keeping the other on the ground, with the operation light
on; the balancing system starts automatically and finds balance, so you can put the other foot on. The
system will find its balance when both feet are on the platform.
• Stage 3. After correct balancing, the product will remain stationary. Lean slightly forward and backward
to move forward and slow down.
IMPORTANT
• Step 4: Check the direction.
• Step 5: Getting off the product: stop and keep the device stable, first remove one foot placing it behind
(not in front) and then the other
2. Learn to ride the hoverboard
If the platform of the device is not balanced, you will hear a beep and the
alarm light will light up before the system enters automatic balancing
state.
Left foot forward
turns right
05
Left foot forward
turns right