NuTone CFS52BS Instrucciones De Montaje página 5

FINISH INSTALLATION
1. Tuck connections neatly into ceiling outlet box.
2. Slide the canopy up to hanger bracket and place the key hole on
the canopy over the screw on the hanger bracket, turn canopy until
it locks in place at the narrow section of the key holes. (Fig. 11)
3. Align the circular hole on canopy with the remaining hole on the
hanger bracket, secure by tightening the two set screws. Note:
Adjust the canopy screws as necessary until the canopy and canopy
cover are snug.
MODELS CFS52BS • CFS52PB • CFS52RB • CFS52WH
HANGER
BRACKET
SCREW
OUTLET BOX
SCREW
CANOPY
CANOPY
BOTTOM COVER
FIGURE 11
Page 5