Pyronix COLT XS Manual De Instrucciones

H OR IZ ONT AL COV E R AGE
A1 15M
14M
12M
Horizontal Coverage
at Maximum Range
10M
Setting
8M
6M
4M
2M
A2
+ - N / C T T
V E R T ICAL COV E R AGE
2.4M
8FT
LED ON
LED OFF
PC1
PC2
PC3
PCB at Maximum 2M 4M 6M 8M 10M
Range Setting
2.4M
8FT
+ - N / C T T
2M 4M 6M 8M 10M
LED ON
LED OFF
PC1
PC2
PC3
V OL U ME T R IC
PCB at Minimum
Range Setting
o
90
34 Z ONE E DGE S
3 P L ANE S
Pulse Count 1
D1
Pulse Count 2
Pulse Count 3
0.3 - 3.0 m/s
Control Panel
E2
E1 ZONE
TAMP
ZONAS
24HR
ZONES
E3
PIR
9 - 16Vdc
15mA
12V
60V
@12Vdc
50mA
50mA
B1
Mark wall for fixing
positions.
Choose 2 suitable wall
fixing knockouts.
Bracket = EB1
B3
B2
9 Wall Mounting
+ - N / C T T
cable =5mm
LED ON
LED OFF
PC1
PC2
PC3
15M
50FT
Replace Printed
circuit board.
12M 15M
1
C1
= 72g (2.54 oz) without bracket
Kg
C1
3mm
(0.12")
12M 15M
52mm
(2.0")
PULSE COUNT
SELECT
+ - N / C T T
1 2 3
LED ON
LED OFF
PC1
PC2
PC3
+ - N / C T T
T T
T T
LED ON
LED OFF
This product is sold subject to our standard
PC1
PC2
PC3
warranty conditions and is warranted
against defects in workmanship for a period
NORMAL ALARM
In the interest of continuing improvement
of quality, customer care and design, Pyronix Ltd
reserve the right to amend specifications
without giving prior notice
NORMAL ALARM
INSTALLATION
Drill fixing
holes.
1. Remove case lid by unscrewing fixing screw
and remove the PCB.
Use 5.0mm (Do not touch Pyro sensor Labeled
drill bit.
2 . Choose suitable wall fixing holes.
3. Do not partially or completely obscure the detector's field of view
with large objects such as furniture
4. Mark wall for fixing positions (Do not route wires near mains
cabling, avoid vibrating surfaces, and only use solid wall)
5. Drill fixing holes.
6. Fix case to wall. B2
7. Replace PCB (Do not touch Pyro sensor Labeled
8. Refit lid to case and fasten.
POTENTIAL FALSE ALARM HAZARDS
1. Direct sun light on detector may cause false alarms.
2. False Alarms may be caused by pets and animals.
3. Do not mount detectors near heaters.
4. Draughts from open windows may cause false alarms.
B5
DIAGRAMS
Cable Entry
Knockouts.
A1 Horizontal Coverage Pattern.
A2 Mounting Height = 1.8m to 2.4m, Coverage Pattern (Side Elevation)
B4
(Height adjustment will effect PIR range)
Wall fixing Knockouts.
B1
Wall Mounting
B2
Ceiling mounting.(Optional mounting with bracket)
B3
Case lid screw fitting.
B4
Cable Entry Knockouts.
B5
Measurements and weight (72g) without bracket.
C1
Pulse count 1,2,3 (Increases the detection time before an alarm
D1
condition is generated)
LED disabled when link pin removed.
44mm
D2
(1.73")
Pyro Sensor (Do not touch)
D3
Wiring to control panel.
E1
D3
Tamper Operation
E2
Normal = Cover closed
Alarm = Cover open
PYRO SENSOR
SPECIFICATIONS (QUICK REFERENCE)
Model:
D2
ALARM LED
Colour:
Casing:
Detection method:
Sensitivity:
Temperature Compensation:
Disable Enable
Detection Range:
Detection Zones:
Detection speed:
Operating Voltage:
WARRANTY
Quiescent Current:
Relay Output:
Contact Resistance
Mounting Height:
of five years.
Tamper Switch:
Storage Temp:
Nominal Operating Temp: -30 C / 70 C
Certified Operating Temp: -10 C / 40 C
Accessories:
Emissions:
Immunity:
GB
B4
on diagram)
D3
B1
on diagram)
D3
B4
Relay Contacts
E3
Pyronix Limited
Normal = No movement
Pyronix House
Alarm = Intruder detected
Braithwell Way
Hellaby, Rotherham
S66 8QY, ENGLAND
Pyronix Colt XS
White
3mm ABS , 0.4mm HDPE in Lens area.
Low noise Dual Element Pyroelectric sensor
Analogue Pulse Count 1,2,3
Automatic
15m
34
0.3 - 3 .0 m/s
9-16 VDC
15 mA at 12V
50mA, 60VDC / 42VAC (RMS)
<10Ohms
1.8m - 2.4m
12V 50mA
-40°C / 80 C °
° °
° °
Mounting bracket included
EN55022 Class B
To new European Standard
EN50130-4
R
COLT XS
AB74
Customer Support:
+44(0)845 6434 999 (local rate)
or +44(0)1709 535225
Hours: Mon to Fri, 8:00am till 6:30pm
Email: customer.support@pyronix.com
Website: www.pyronix.com
For electrical products sold within the European
Community. At the end of the electrical products
useful life, it should not be disposed of with
household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for
recycling advice in your country.
This product is approved for use in the
Residential, Commercial and Light Industrial Environment.
EN50131-2-2:2008
EN50131-1:2006+A1:2009
2
PD6662:2010
Security Grade 2
Environmental Class 2
This product complies with EN50131-2-2:2008 at security grade 2,
environmental class 2.
UK = Suitable for use with systems installed to PD6662:2010
EXPORT = Suitable for use with systems installed
to EN50131-1:2006+A1:2009
RINS345-11