Denver MT-779DVBT Manual De Instrucciones página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 53
1.3 TV TYPE - it is used to select the TV scan mode, please
set as per your TV set.
Options: 4:3PS : Normal Pan & scan mode
4:3LB : normal Letter box mode
16:9 : 16:9 wide screen mode
1.4 PASSWORD - input password to unlock the system. The
steps are as follows:
1.4.1 Enter SYSTEM SETUP, select the PASSWORD item by
scrolling the down navigation button, and then press the right
navigation button to select the input box.
1.4.2 Input user's password "0000" to unlock it, in this case,
select the input box again to change the password by inputting
another new four numeric numbers and then press OK button
to confirm. When the password is changed, you are needed to
input the new one to unlock the system.
1.4.3 Once you forget your own password, use the
supervisor's password "8200" to unlock it.
NOTE: If wrong password was input in unlock status, the
system will lock.
1.5 RATING - Set the rating of this player. If you want to
change the rating of parental lock, please input the password
to unlock first.
Options: 1 KID SAFE / 2 G / 3 PG / 4 PG 13 / 5 PG-R / 6R / 7
NC-17 / 8 ADULT
1.6 DEFAULT - Reset to factory settings.
Options: RESTORE
2. LANGUAGE SETUP
LANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
2.1 OSD LANGUAGE - It is used to select different On Screen
Display language for different user.
2.2 AUDIO LANG - select preferred audio language.
(DVD only, need disc software support)
2.3 SUBTITLE LANG - Select preferred subtitle language.
(DVD only, need disc software support)
2.4 MENU LANG - Select preferred disc menu language.
(DVD only, need disc software support)
3. VIDEO SETUP
VIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
3.1 BRIGHTNESS - to set the brightness for the display.
Options: 0/2/4/6/8/10/12
3.2 CONTRAST - to set the contrast effect for display.
Options: 0/2/4/6/8/10/12
3.3 HUE - to set the colour impression for display.
Options: -6/-4/-2/0/+2/+4/+6
3.4 SATURATION - to set the saturation level for display.
Options: 0/2/4/6/8/10/12
4. SPEAKER SETUP
SPEAKER SETUP
DOWNMIX
4.1 DOWNMIX
Options: LT/RT - Left/Right mix mode
STEREO - Select this option if you don't have a 5.1
channels amplifier.
DVB OPERATIONS
GET STARTED
Be sure the TV antenna is connected to your player
properly;
Power on the player and press FUNCTION button on the
remote or press and hold FUNCTION button on the unit to
switch to DVB-T mode.
A dialogue of first time installation shows on the screen, select
YES option to perform the first time installation, then select the
options as mentioned in the dialogue to finish the first time
installation, select NO option to exit this interface.
Note: During DVB-T playback, if not any operation in four
hours, the unit will be switched off. Before switching off the unit,
alert information shows on the screen for warning, press
corresponding button to operate the unit for continuous
playback. If the unit is powered off automatically, it is
necessary to slide the POWER SWITCH to OFF position first,
then slide the POWER SWITCH to ON position to power on
the unit again.
SEARCH A PROGRAM
Press NAVIGATION UP/DOWN button to change the channel
number. A desired channel can be reached using these two
keys.
Once the desired channel is selected, it will start broadcasting
the selected channel immediately.
SWITCHING BETWEEN TV/RADIO
During DVB play mode, press TV/RADIO button on the remote
to switch to RADIO play mode (Need signal source support).
TELETEXT
Press TTX button to display teletext information (Need signal
source support).
ELECTRONIC PROGRAM GUIDE
Press EPG button on the remote to enter into electronic
program guide in DVB mode (Need signal source support).
PROGRAM INFORMATION
Press INFO button during DVB play mode to show the
program detail information (Need signal source support).
LANGUAGE
Press LANGUAGE button on the remote to change different
language supplied by TV programs in DVB mode (Need signal
source support).
FAVORITE
Press FAV button to enable or disable the favorite function
after set the channels class on the setup menu, and press
navigation UP/DOWN menu to switch the channel among your
favorite channels selected on the setup menu.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido