Publicidad
Idiomas disponibles
Idiomas disponibles
8. Place shield on hood in mounting position. Make sure to
center shield. (Figure 8)
FIGURE 8
9. Attach shield using the provided screws (D). Repeat in four
places. (Figure 9)
FIGURE 9
10. Make sure F-Bracket is nested onto the hood as shown in
the illustration below, and tighten set screw using supplied
hex key (K). (Figure 10)
FIGURE 10
Hood Deflector
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCOR-
DANCE WITH GMSPO SPECIFI-
CATIONS.
5X
SCREW D
4X
!
DO NOT OVERTIGHTEN
SET SCREW (K)
REVISION
11. Close the hood to latch position only. Apply Mylar strips (I)
to the top of headlights and grill in each bracket location.
(Figure 11)
FIGURE 11
MYLAR PAD (I)
5X
12. Close the hood. (Figure 12)
FIGURE 12
REV 05AP06
PART NO.
INSTALLATION INSTRUCTIONS
AUTH
DR
TITLE
PART NO.
19156546
6200 Grand Pointe Dr., Grand Blanc, MI 48439
19156546
SHEET
Hood Deflector
3
SHEET
3
9
OF
9
OF
Publicidad
