Main Features - Haier LET26C400HF Manual De Usuario

02
Introduction
CAUTION
Never tamper with any components inside
the TV, or any other adjustment controls
not mentioned in this manual. All LED-TVs
are high voltage instruments. When you
clean up dust or water drops on the LED
PANEL or CABINET, the power cord should
be pulled out from the receptacle, then
wipe the TV with a dry soft cloth. During
thunder and lighting, unplug the power cord
and antenna cord to prevent damage to
your TV. All repairs to this TV should only
be performed by qualified TV service
personnel.

Main features

1 Used as Television, display terminal,
PC display
2 High luminance, wide viewing
Angle
3 Time-shift
Main parameter
Panel
TV System
Video Signal System
Input Power Voltage
Power consumption
Standby Power consumption
Audio Output Power
Signal Input
Horizontal definition TV line
P.05
26
PAL-B/G a Ia D/K
SECAM- B/Ga D/Ka La L
PAL/SECAM
AC 100V-240V 50/60Hz
55W
<0.5W
2x5W
THD 7%
Analog RGB(PC) x1; PC audio x1
High-Definition Multimedia Interface (HDMI)x2
Video INput x1
Audio Input x1
Ya Pb Prx1
Mini SCARTx1
CI x 1
USB x 1
Tuner x 1
Composite Video input >=350
YPbPr
INSTALLATION
*Locate the TV in the room where light
does not strike the screen directly.
*Total darkness or a reflection on the
picture screen can cause eyestrain. Soft
and indirect lighting is recommended for
comfortable viewing.
*Allow enough space between the TV and
the wall to permit ventilation.
*Avoid excessively warm locations to
prevent possible damage to the cabinet or
premature component failure.
*Do not cover the ventilation openings
when using theTV.
4 HDMI interface and SCART
Interface
5 NICAM
31.5
'
75W
2x8W
>=400