Steelcase Cura II Manual De Instrucciones página 2

®
HEALTH
Glide Replacement for 4-Leg Chair
1.
Place chair on it's back.
2.
Remove screw from glide (2a).
Remove glide and glide plug (2b).
3.
Install replacement glide onto frame by first inserting glide plug
into bottom of leg (3a). Insert glide into glide plug (3b). Secure
using one (1) screw (3c). Repeat this procedure for any other glides
that require replacement.
1
LEG
2a
SCREW
GLIDE
PLUG
GLIDE
2b
3c
3b
3a
Glide Replacement for Sled Base Chair
1.
Place chair on it's back.
2.
Remove screw from glide (2a).
Remove glide and glide housing (2b).
These glide plugs These glide plugs
need to be used at need to be used at
the top of the sled the bottom of the sled
frame where the frame where the frame
curve is present. is straight.
2a
SCREW
2b
FRAME
GLIDE HOUSING
GLIDE
3.
Install replacement glide onto
frame by first inserting glide into
glide housing (3a) and placing on
frame. Secure using one (1) screw
(3b). Repeat this procedure for any
other glides that require
replacement.
1
3b
3a
Page 2 of 6
939549933 Rev C