Battery Disposal - JBL On Stage III Manual Del Usuario

jbl On Stage III easy setup guide
MENU
Step 1. Unpack the JBL On Stage
III, adapter, remote control, pow-
er adapter and input cable. Read
these instructions completely.
or
Step 5. Place the appropriate iPod adapter onto JBL On Stage III. Place
your iPod on the docking connector or connect the audio input cable
to the rear of the JBL On Stage III. Connect the audio cable to the
audio source.

Battery Disposal

Alkaline batteries are considered nonhazardous and can be disposed of with your regular household trash.
Rechargeable batteries (i.e., nickel cadmium, nickel metal-hydride, lithium and lithium-ion) are considered hazardous household materials and may pose an unnecessary health and safety risk. Unwanted materials should be disposed of in an
environmentally sound manner. Contact your local waste management officials for other information regarding the environmentally sound collection, recycling and disposal of used batteries.
DO NOT MIX BATTERY TYPES
DO NOT MIX CHARGED AND PARTIALLY CHARGED BATTERIES
BATTERIES WILL NOT RECHARGE WHILE IN JBL On STAGE III
Step 2. Rotate the battery door
to the unlocked position to open
the battery compartment.
Step 3. Place 6 AA batteries in
the battery compartment.
Step 6. Press the Power button
on the back of the JBL On Stage
III. A green LED will light when
the JBL On Stage III system is
on.
4
Step 4. Connect the power adapter
into the input marked on the rear
of the JBL On Stage III; plug the
power adapter into a wall outlet or
power strip.
Step 7. Adjust the volume using
(+) to increase and (–) to decrease.
Press both to mute the JBL On
Stage III. Press either button to
unmute.