JBL spot Manual Del Usuario página 4

jbl spot easy setup guide
™
Step 1. Unpack the JBL Spot sub-
woofer, satellites, power adapter
and input cable. Read these
instructions completely.
Step 5. Plug the power adapter
into a wall outlet or power strip.
Step 2. Plug the left and right
satellites into position on the
rear of the subwoofer.
Step 6. Press the Power button
on the back of JBL Spot. A green
LED will light when the JBL Spot
system is on.
Step 3. Connect the audio input
cable to the rear of the sub-
woofer. Connect the audio cable
to the audio source.
-
+
-
Step 7. Adjust the volume using
(+) to increase and (–) to decrease.
Press both to mute JBL Spot. Press
either button to unmute.

Step 4. Connect the power adapter
plug into the position marked on
the rear of the subwoofer.
Step 8. Adjust bass level by turning
the Bass-Level knob on the rear of
the subwoofer.