Important - JOYTECH Control Center 540C Manual Del Usuario

Using an S-video cable to connect
to your TV
Follow the diagram below to connect the Xbox 360™
console and Control Center™ 540C using an S-video
cable with stereo audio to your TV.
1) Connect the AV Interconnect Cable (supplied) to the A/V
connector on the rear of the Xbox 360™ console and to the
Input Channel 1 connector of the Control Center™ 540C.
2) Check the Control Center™ 540C is set to output an S-
video signal from input 1 (Xbox 360™ console)
Note: If you choose to connect the Control Center™ 540C
to the S-video input on your TV, you must select the S-video
setting on the Control Center™ 540C in order to display the
picture correctly. If you are connecting via S-video and you
see no picture on your TV, check the Control Center™
540C is set to output S-V. For set-up details, see the sec-
tion on Control Center™ 540C settings.
XBOX360 Console
AV Interconnect
540C Control Center
Cable
(supplied)
IMPORTANT: The AV output settings only need to be
adjusted for Input 1 (Xbox 360™ console). AV signals from
inputs 2 to 6 pass directly through the Control Center™
540C and are output through their corresponding connec-
tions in the multi output channel.
3) Connect an S-video cable (sold separately) to the
Control Center™ A/V multi output and then to the TV.
REMEMBER: S-video does not carry audio signals so it
must be combined with a right and left audio cable or a digi-
tal optical cable (both sold separately).
4) Select the appropriate video input on your TV (refer to
your TV instruction manual for connection details).
R
L
S-video
S-video Cable
TV Audio and
Video inputs
L R
Video
S-Video White Red
ENGLISH 3