Art. no. 04003609
5 x multi-socket strip with overvoltage protection 13500A
Operating instructions
Technical data:
Operating voltage: ~250 V /16 A / 50 Hz Max.
Connected rating: 3680 W
Uoc (open-circuit voltage): 2.5kV (L-N)/5.0kV (L/N-PE)
Up (protection level): 1.6kV (L-N)/1.3kV(L/N/-PE)
Surge current 13500A
Operating temperature 0 °C-40 °C
Functional description:
A voltage spike or a lightning strike can cause irreversible
functional damage. Voltage fluctuations can lead to failures,
especially in the IT sector. This unit provides the power
supply protection against such problems.
Your house/apartment must also have separate lightening protection.
We recommend equipping the following devices with the
multi-socket strip with overvoltage protection:
Electrical devices such as HiFi, computers and computer
peripherals...
Please do not use the device with powerful electric appliances such
as dryers, washing machines, refrigerators ...
Max. connected rating: 3680 watts.
Starting up:
-Please check the functionality of the device that you want to connect with the overvoltage protection adapter.
-Connect the overvoltage protection adapter to an earthed power outlet.
-Switch off all devices before installation.
-The mains plug of the computer/electrical device must be connected to the mains sockets of the overvoltage protection adapter.
The lightning protection indicator light and operating indicator must light up if the overvoltage protection adapter is connected.
Problem/error
The green LED does not light.
The red LED does not come on. Voltage too high
Safety notice:
• Keep out of the reach of children!
• Do not plug two overvoltage protection adapters in succession.
• Do not operate covered!
• Free of voltage only when the plug is out!
• Only for use in dry rooms! (The overvoltage protection adapter is not suitable for connection
to an aquarium/aquarium accessories)
• Stop using in the event of damages!
After the end of its service life, please take the device for proper disposal.
Do not throw in the household waste; take the device to a collecting point for electrical
and electronic equipment.
In the interests of environmental protection, please also ensure appropriate recycling of the packaging materials.
Packaging materials are raw materials and can be recycled.
Your responsible administration will be glad to provide details of the addresses and opening hours of collection points.
Possible causes
Solution
Socket has no power
- The adapter no longer protects against overvoltage and must be taken out of service.
(current)
- Get in touch with an expert. Check to see whether the power supply is conducting power
(e.g. connect another electrical device as a test)
- Check whether the mains power corresponds to the voltage specified on the label.
The adapter no longer protects against overvoltage and must be taken out of service.
EN
HEITECH Promotion GmbH
Krefelder Strasse 562
D-41066 Mönchengladbach
Tel +49(0)2161-47763-0
Fax +49(0)2161-561 746
Lightning protection indicator light
Operating
indicator
Child protection