Publicidad
Idiomas disponibles
Idiomas disponibles
Lower Tie-downs
When lower tie-downs are not in use cover the holes with the 2.5"
round plug.
Bedliner and Tailgate Liner
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
05DE13
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER.
PRINT ON BOTH SIDES, EXCLUD-
ING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE
WITH GM SPECIFICATIONS.
P.N. 1490553
P.N. 23438217
REVISION
Initial Release - Fabricio Vega
Bedliner Installation:
1. Insert the bedliner driver's side wall under the truck bed rail.
2. Lift center of bedliner floor in order to insert the passenger's side
wall under the truck bed rail.
A second person maybe required to guide the bedliner side wall
under the side wall of the truck.
3. Inset the top edge of the rear top end under the plastic rail cap.
Using a center punch, carefully mark the screw location in the
center of both of the pre-drilled holes (1 each side) in the bedliner.
Position the self drilling screws at the marked locations. Fasten
the screws to the truck box wall with a power screw driver.
DO NOT OVER TIGHTEN TO AVOID DAMAGE ON SCREW
Upper Tie-downs
When upper tie-downs are not in use cover the holes with the oval
plug.
IR 05DE13
INSTALLATION INSTRUCTIONS
AUTH
DR
TITLE
1977021
PART NO.
22912574
PART NO.
Bedliner and Tailgate Liner
22912574
P.N. 23438217
2
6
SHEET
OF
2
6
SHEET
OF
Publicidad
