Leister GEOSTAR G5 LQS Manual Del Usuario página 6

Full Memory Card / GEOSTAR G5/G7 LQS
GB
1
Warning note on the GEOSTAR display after power
interruption < 6 sec. during first welding. Data
recording is no longer possible from this point on.
3
The "Full Memory Card" problem only occurs with
GEOSTAR LQS welders with this software version.
This information can be found in the main menu
under "General Info."
5
Switch on GEOSTAR.
7
The Leister LQS app should have the following version:
Windows = 1.1.35
Android = 1.1.4
IOS = 1.1.4
The app version can be found in the "?Info" menu.
6
2
In the menu "Welding Data Record," free storage
space on the SD card is 0MB.
4
Completely switch off the GEOSTAR. This means a
power interruption > 6 sec.
6
Switch on from the WLAN module. This can be
found in the main menu under "WLAN settings." The
GEOSTAR is now ready to transmit.