Timer Settings - Zadro OXY03 Manual De Usuario

Ocultar thumbs Ver también para OXY03:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TIMER SETTINGS

1.
When the OXYGEN ON/OFF is turned on, press the up and down TIMER buttons on the
LCD screen display panel on the front of the unit, or on the remote control.
2.
Choose between the following 8 timer settings (the unit will auto shut off when the
timer setting is finished):
15 minutes
30 minutes
45 minutes
1 hour
AROMATHERAPY
Use the aromatherapy reservoir to infuse the oxygen with your choice of essential oils
(optional).
Unscrew the reservoir located in the middle of the air tube by twisting until it
completely detaches, add your desired amount of essential oil (2-4 drops are
recommended), then screw the reservoir back together to lock into place.
HUMIDITY
1.
If you're in a dry climate, you can increase the humidity within the oxygen flow by
utilizing the humidity feature (optional).
2.
Before turning on the unit, pull out the humidifier door and slide out the water tank
cup. Then fill the cup with water up to the "MAX" fill line.
3.
Turn on the power supply switch in the back of the unit, then press the "OXYGEN ON/
OFF" button on the LCD screen display panel on the front of the unit, or on the remote
control.
4.
The water tank will automatically start when the OXYGEN ON/OFF button is pushed to
turn on the airflow.
5.
To refill the water tank, turn off the oxygen flow and power supply first before sliding
out the water cup.
1 hour 15 minutes
1 hour 30 minutes
1 hour 45 minutes
2 hour
FIGURE 1
Oxygen Outlet
Nozzle
Essential Oil
Reservoir
Ear Hang
Joint
Page 6

Publicidad

Tabla de contenido
loading

Tabla de contenido