Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (10F) into the large holes in the BRACES (D and E).
NOTE: Do not push any TWIST-LOCK® FASTENERS into the
å
indicated holes in the UPPER BRACE (E) at this time. If you
need to remove a TWIST-LOCK® FASTENER from a hole,
pull the FASTENER back out of the hole. Pull at the front and
back edges, slowly working the FASTENER out of the hole.
Do not push TWIST-LOCK®
FASTENERS into these holes
at this time.
10F
www.sauder.com/services
10F
Do not tighten the TWIST-LOCK® FASTENERS in this step.
D
E
414941
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=904
to watch a video on how to assemble your unit.
D
Do not push TWIST-LOCK®
FASTENERS into these holes
at this time.
10F
Page 5
Publicidad
