8. Install the group blade, outer foil, storeroom in opposite order.(Pic 8)
• Be careful of hurting the hand when take out the group blades.
• Don`t push or strike the outer foil.
• Wipe the frame with dry cloth.
• Clean the lint storeroom before it is eighty percent full.
• The flocks hiding in the inner of the outer foil and group blades will affect the sharpness
and the rotation.
Please clean them with the brush..
DISPOSING OF THE BATTERY
• The battery used in this lint remover contains material that will pollute the environment.
If you need to dispose the lint remover, please dismantle the battery and turn it to the
formal collection places.
• Before dismantling the battery, you must be sure that the battery has no remaining
electricity. If there is remaining electricity, turn on the lint remover until the motor stops.
• You yourself also can dismantle the battery out the lint remover
1. Loosen the screw by screwdriver (Pic 1)
2. Use screwdriver to push-out the decorative slice from the internal of the socket (Pic
2)
3. Unscrew the storeroom anticlockwise (Pic 3)
4. Push-out the inclicator and switch by screwdriver (Pic 4)
5. Loosen the screw by screwdriver (Pic 5)
6. Dismantle the battery electric iron or forceps (Pic 6)
• After dismantle the battery, do not connect the lint remover and its charging plug to
the AC outlet.
- 8 -