Safety Information - AUDICTUS CONQUEROR Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9
How to pair the headphones with a new device?
• Enable the Bluetooth functionality of the device you wish to pair with the headphones
• Turn on the headphones by pressing and holding the button
notification LED
will start blinking red/blue
• From the list displayed on your device, select the Audictus Conqueror ANC headphones
• The headphones will confirm that a connection has been established with a short voice
prompt and the notification LED
From now on, pairing will occur automatically when both devices are within range.
How to unpair the headphones
from a device?
• The headphones must be turned o
• Turn on the headphones by pressing and holding the
• The notification LED will start blinking red/blue, and the headphones can be
paired with a new device
Enabling/disabling the ANC
and Sound Passthrough mode
• To enable the ANC mode, press the
confirm its enabling with a short voice prompt
• Press the
button again to disable the ANC mode and enable the Sound
Passthrough mode. The headphones will confirm its enabling with a short voice prompt
• Press the
button again to disable the Sound Passthrough mode
Charging
If the battery is low, the headphones will communicate the need to charge
with a short voice prompt.
• Connect the USB Type-C cable (included) to the device
• Connect the cable to a suitable power source
The notification LED
is red during charging.
The notification LED
is white during quick charging.
ATTENTION! In order to be able to benefit from the quick charging
functionality, use a charger that supports the USB-PD standard and has a
power rating of 10 W or higher.

Safety Information

• Use only as intended.
• The equipment may be damaged when used improperly.
• Unauthorised attempts by unqualified personnel to open the equipment may
cause damage to the device and void its warranty.
• Damage to the equipment, its housing or other defects may be caused by
impact or fall.
• Do not use the product in an extremely hot, cold, dry, moist or dusty
environment.
• Do not cover the ventilation openings in the housing because this may cause
overheating and damage the equipment.
for 5 seconds. The
will blink blue
button for 5 seconds
button once. The headphones will
EN | PL | CZ | SK | DE | RO | HU | ES | BG | RU
Included
• ANC Audictus Conqueror wireless headphones
• USB Type-C power cable
• USB Type-C to minijack 3.5 mm cable
• Instruction manual
General
• 2 years limited manufacturer warranty.
• Safe product, conforming to the EU requirements.
• The product is made in accordance with RoHS European
standard.
• The WEEE symbol (the crossed-out wheeled bin) using indicates
that this product in not home waste. Appropriate waste
management aids in avoiding consequences which are harmful
for people and environment and result from dangerous materials
used in the device, as well as improper storage and processing.
Segregated household waste collection aids recycle materials
and components of which the device was made. In order to get
detailed information about recycling this product please contact
your retailer or a local authority.

Publicidad

Tabla de contenido
loading

Tabla de contenido