2) If the unit has already been used, press the on/speed button to resume to work and the settings will be
the same as the last time; except for the function of timer and sleeping mode.
3) If the unit is working, press on/speed button to adjust the speed. It will work as below:
Low → Mid → High → Low ... (repeating).
4) After the unit is turned on, the blue LED light on the lower part of the main body will illuminate. If the
unit is turned off, the LED light will go out.
2. MODE: Press the button to choose the mode functions from normal →Breeze → Sleeping → Normal ...
(repeating).
1) Normal: under this mode, the motors work with the preset speed and the display of
are off.
2) Breeze: under this mode, the display of
and repeat automatically. You can press "ON/SPEED" button to choose speed 1 / 2 / 3.
3) Sleeping: under this mode, the display of
will be automatically changed from high to low and keep working as speed 1 until you manually change
the speed.
(For example: If you choose speed 3, the motor will work as speed 3. After 30 minutes, it will
automatically change to speed 2. After 30 minutes again the motor will change to speed 1 and keep
working as speed 1 unless you manually change the speed.)
3. SWING: Press this button to control the oscillation function on and off. The display of
off accordingly.
4. TIMER: Press this button to set your desired working time from 0.5h → 1h → 1.5h → 2h → ... → 7.5h → off
→ 0.5h ... (repeating). After the timer is set, the unit will count down with LED display showing the
remaining time (For example, if the timer is set with 2h, after 30 minutes the LED display will show 1.5h.).
After the set time, all timer functions are disabled, the display will be off and the unit will not be working
anymore. The fan is under standby condition now.
5. SHIFT: Press this button to choose any fan blade to work.
1) You set the fan on working status once you press the button the first time. Display of Fan 1, Fan 2 and
Fan 3 will flash 5 seconds in order to select the different fan blades.
2) During the setting status (display of fan blades is flashing), press the button MODE / SWING / TIMER to
choose Fan 1, Fan 2 or Fan 3 to work. When you turn off all the three fans, the unit will also be turned
off and at standby condition.
3) During the setting status (display of fan blades is flashing), press SHIFT button, ON/SPEED button or do
not operate for 5 seconds, the setting status will be closed. The LED display will stop flashing.
6. OFF: Press this button and all functions and the display will be off. The unit will be at standby condition.
AROMA PAD FUNCTION
After inserting the aroma pad into the front fan guard, a flood of fragrance will be spread out in the whole room
once the fan is turned on. Please insert the aroma pad with the pillars buckled into the fan guard.
REMOTE CONTROL
This unit has a remote control. One piece of CR2032 battery will be provided with the unit. The functions of the
remote control buttons are the same as of the buttons on the control panel. You can store the remote control in
the recess provided on the rear panel.
- 50 -
is on and
is off. The fan will work from high to low
is off and
is on. The speed level (Speed 1 / 2 / 3)
&
will be on and
TF-108449