Star-fan FAN-102477 Manual De Instrucciones página 51

OPERATING INSTRUCTIONS
Plug the power cord into a suitable socket. The indicator light of power is on and the appliance is under standby
condition. Press the on/off switch and the fan begins to work with the following presetting:
Speed: low / Timer: off / Mode: normal (indicator lights of "NATURE" & "SLEEP" are off) / Oscillation: off
Please gently press the buttons on control panel to choose your desired functions.
1. Oscillation (OSC)
2. Mode
a. Nature
b. Sleep
3. Timer
a. 0.5h
b. 1h
c. 2h
d. 4h
4. Speed
a. L = Low
b. M = Medium
c. H = High
5. On/off switch
6. Signal receiver against remote control
NOTE: The functions of the remote control buttons are the same as the functions of the buttons on the control
panel.
1. Oscillation: Press this button to control the oscillation function on and off. The indicator light of "OSC" will
be on and off accordingly.
2. Mode: Press this button to choose the mode functions "NATURE" or "SLEEP" and the corresponding
indicator light will be on. NOTE: if you do not choose the mode, the fan will be working with the normal
presetting speed.
a. Nature: when the indicator light of "NATURE" is on, the fan is under the mode of breeze blowing. You
can press the "SPEED" button to choose speed L / M / H.
b. Sleep: when the indicator light of "SLEEP" is on, the fan will work inconsistently. The speed level (L / M /
H) will be changed from high to low and keep working as low speed until the timer is off or you manually
turn off the appliance.
(For example: If you choose speed H, the motor will work as speed H. After 30 minutes, it will
automatically change to speed M. After 30 minutes again the motor will change to speed L and keep
working as speed L unless you manually change the speed.)
3. Timer: Press this button to set your desired working time from 0.5h → 1h → 1.5h → 2h → ... → 7.5h → off
→ 0.5h ... (repeating). After the timer is set, the unit will count down with related indicator light illuminate
showing the remaining time (For example, if the timer is set with 1h, after 30 minutes the indicator light of
1h will be off and light of 0.5h will be on.). After the set time, all timer functions are disabled, the indicator
light will be off and the unit will not be working anymore. The fan is under standby condition now.
4. Speed: Press this button to choose your desired speed: Low / Medium / High. The related indicator light will
be on accordingly.
5. On/off switch: Press this button to turn on / off the fan under standby condition.
a. If the appliance is turned on at the first time, it will work with the following presetting: Speed: low /
Timer: off / Mode: normal (indicator lights of "NATURE" & "SLEEP" are off) / Oscillation: off
b. If the appliance has already been used and you need it resume to work, press this button and the
settings will be the same as the last time except for the function of timer and the sleep mode.
- 50 - FAN-102477