Jabra SP5050 Manual Del Usuario página 6

1. Charge your headset
Make sure that your Jabra SP5050 Speakerphone is fully charged
for two hours before you start using it . use only the charger
provided in the box – do not use chargers from any other devices
as this might damage your Jabra SP5050 .
Connect your Speakerphone as shown in fig 2 . When the led indi-
cator light is solid red on the car charger, your headset is charging .
When the led indicator light is green, it is fully charged .
2. Turning your Speakerphone on and off
Press the answer / end button to turn on your Speakerphone
(see fig ) .
The power on indicator light will turn on . The connecting status
indicator light will blink twice every 2 second until the Jabra
SP5050 is connected to your mobile phone – then it will turn solid
blue .
To turn off your Speakerphone press the answer/end button until
you see a burst of flashes .
With Jabra autooff, your Speakerphone will automatically turn off
5 minutes after it has lost the connection to your mobile phone .
So it doesn't matter if you don't turn off your SP5050 when you
leave the car – SP5050 will take care of that for you .
3. Pair it with your phone
Before you can use your Jabra SP5050, you need to pair it with
your mobile phone .
 . With Jabra autopairing, your Speakerphone will automati-
cally enter pairing mode the first time you turn it on .
2 . Set your Bluetooth phone to 'discover' the Jabra SP5050 .
follow your phone's instruction guide . This usually involves
going to a 'setup, ' 'connect' or 'Bluetooth' menu on your phone
and selecting the option to 'discover' or 'add' a Bluetooth
device .* (See example from a typical mobile phone in fig 3) .
Jabra JX0 Bluetooth headset
4