Onkyo HT-RC630 Manual Básico página 12

5
Using Quick Setup menu
In the Quick Setup menu, you can set frequently used
functions including input selection and volume adjustment.
1.
Press Q SETUP on the remote controller.
The Quick Setup menu is displayed on the connected
TV's screen.
Q u i c k S e t u p
I n p u t
A u d i o
I n f o r m a t i o n
L i s t e n i n g M o d e
2. Select the item with the cursor buttons of the
remote controller and press ENTER to confirm your
selection.
To return to the previous screen, press RETURN.
Input: Select the input and check the assignment of input
selector buttons.
Audio: You can change various audio settings including
the ones for adjusting audio quality and speaker level.
You cannot select this item when audio is played from the
TV's speakers.
A/V Sync: If the video is behind the audio, you can
delay the audio to offset the gap.
It cannot be set if the input is "USB" or
"BLUETOOTH".
It cannot be set if the listening mode is Direct.
Bass, Treble: Adjust volume of the front speaker.
It cannot be set if the listening mode is Direct.
PM Bass (Phase Matching Bass): Suppress phase
shift in the midrange to enhance bass sound. Thus
smooth and powerful bass sound can be obtained.
It cannot be set if the listening mode is Direct.
Subwoofer Level, Center Level: Adjust the speaker
level while listening to the sound. The adjustment you
made will be reset to the previous status when you turn
the unit to standby mode.
The speakers cannot be adjusted if they have been
set to "No" or "None" in "Sp Config".
12
Late Night: Make small sounds to be easily heard. It
is useful when you need to reduce the volume while
watching a movie late night. You can enjoy the effect
on Dolby Digital, Dolby Digital Plus and Dolby TrueHD
sources only.
Turning the unit to standby mode will set the setting
to "Off". In case of Dolby TrueHD, the setting will be
set to "Auto".
Music Optimizer : Improve the quality of the
compressed audio. Playback sound of lossy
compressed files such as MP3 will be improved. The
setting can be separately set to each input.
The setting is effective in the signals of 48 kHz or
less. The setting is not effective in the bitstream
signals.
It cannot be set if the listening mode is Direct.
Cinema Filter: Adjust the soundtrack that was
processed to enhance its high pitch range, in order to
make it suitable for home theater.
This function can be used in the following listening
modes: Multichannel, Dolby Digital, Dolby Digital
Plus, Dolby TrueHD, DTS, DTS-HD High Resolution
Audio, DTS-HD Master Audio, DTS Express, DTS
96/24, Dolby PL II Movie, DTS Neo:6 and Neo:6
Cinema.
Information: Display the audio information.
Listening Mode: Select the listening mode from the
categories of "MOVIE/TV", "MUSIC" and "GAME".
It cannot be set when audio is played from the TV's
speakers.
Step 3: Playing Back