Auxiliary Functions - VOX electronics TDM-705TQ Manual De Usuario

5.2.1. Auxiliary Functions

The table that summarises the options that can be selected in programmes is given below.
Option
Anti-Crease
Drying Level
Delay Start
Buzzer Cancel
Child Lock
If you select the "Anti-Crease" option and do not open the door of the dryer at the
end of the programme, the 1-hour anti-crease phase will extend to 2 hours. After
selecting the Anti Crease option, you will hear an audible warning. You can press
the same button again to cancel the option. If you open the door or press the Start/
Pause key while the anti-crease step is in progress, the said step will be cancelled.
The humidity level obtained after drying can be increased by 3 levels. This way,
level of required dryness can be selected. The levels that can be selected other
than the standard setting: 1, 2, 3. After selection, the LED of the relevant drying
level will turn on.
You can delay the start time of the programme by selecting the 1-hour to 23-hour
option. You can activate the desired delay time by pressing the Start/Pause button.
When the time is up, the selected programme will start automatically. During the
delay time, options compatible with the programme can be activated/deactivated.
Long pressing on Delayed Start button changes delay time continuously.
The dryer gives an audible warning when program selection knob is turned,
buttons are pressed and at the end of programme. To cancel these warnings,
press and hold the "Anti Crease Option" button for 3 seconds. When you press the
button, you will hear an audible warning that the option has been cancelled.
There is a child lock option to avoid changes in the programme flow when keys
are pressed during the programme. To activate the child lock, press and hold
the "Delay start" and "Anti Crease" keys simultaneously for 3 seconds. When
the child lock is active, all keys will be deactivated. Child lock will be deactivated
automatically at the end of the programme. When activating/deactivating the
child lock, the LED of the ''Delay start" and "Anti Crease" options will flash and
an audible warning will be heard. Warning: when the product is running or the
child lock is active, if you turn the programme selection knob, you will hear an
audible warning. Even if you set the programme knob to another programme, the
previous programme will continue running. To select a new programme, you need
to deactivate the child lock and then set the programme selection knob to "Off"
position. Then, you can select and start the desired programme.
EN - 15
Description