9.
TRO U B L E S H O OT I N G
9.1 NO LI Q UI D C OM E S O U T – N O WATE R ?
No liquid comes out: Beverage preparation stops
part way during delivery or does not start at all.
Bar display flashes and power button blinks red
and green rapidly.
9 . 2 NO LIQUID COMES OUT – CAPSULE / INJECTOR BLOCKED?
No liquid comes out: The capsule may be
blocked and under pressure.
3
Rinse the machine: Follow instructions in 5.
"FIRST USE" on page 8. Clean with washing-up
liquid and fresh drinking water both sides of
capsule holder. Rinse drip tray with fresh drink-
ing water and clean it with a clean food-safe
brush.
1
Check if the water tank contains enough fresh drink-
ing water. If not, refill with fresh drinking water and
touch hot/cold water icon again to continue prepara-
tion. If the water tank is full proceed as described in
"9.2 NO LIQUID COMES OUT – CAPSULE / INJECTOR
BLOCKED?".
1
Always keep machine upright! To stop
preparation, touch hot/cold water icon again.
Do not open locking handle by force. Machine
releases pressure.
Wait for 20 minutes to reduce the pressure.
4
Close locking handle. Remove the water tank
and take out the cleaning needle. Keep nee-
dle out of reach of children!
15
2
Do not drink the coffee! Lift the locking handle.
Remove capsule holder. Put used capsule in
capsule bin.
5
Unplug power plug! Remove drip grid and drip
tray. For better access to injector tilt machine.
Never touch injector with finger! Clean injector
with cleaning needle. Follow instructions in 8.
"Descaling at least every 3-4 months" on page 13.
E N