WARNING
Precautions when using with rechargeable battery
These can run out or explode, if inappropriately handled. Please observe the fol-
lowing safety notes when handling the rechargeable battery for use with this unit:
■ Use only rechargeable batteries mentioned in these operating instructions.
■ Do not lay the rechargeable battery into fire or expose these to direct heat.
■ To prevent the product from being damaged make sure you have removed
the rechargeable battery if you will not use the product over a longer period
of time or if the rechargeable battery has been discharged.
■ If battery fluid has come into contact with skin or clothes, flush it off immedia-
tely with fresh water.
■ Do not recharge the rechargeable battery unattended.
■ Once the reacharging process is finished, disconnect the charger from the
power supply.
3. Unpacking and checking the device
1. Carefully unpack the scope of delivery.
2. Check whether the scope of delivery is complete:
• LED floodlight
• Power supply unit
• Mains cable
3. Check whether the scope of delivery is free of damage:
NOTE
If the scope of delivery is incomplete or damaged, please contact
info@walser.de.
Within the scope of product improvements we reserve the right for technical
and optical changes. Not subject to identification as per RL 2010/30/EC – Not
suitable for illumination purposes in households. Specially developed for photo
and video shooting requirements.
24
4. Overview of components and control elements
Round LED
1
3
4
2
1
Front LED's with diffuser area
2
Power pack holder
3
Connection for power supply unit
4
On / Off rotary control
5
LC-Display
5. Quick reference guide
NOTE
Detailed instructions for the following activities can be found in the relevant sec-
tions of these instructions for use. Strictly follow the sequence of the following
activities during first time use, to prevent damage to the device.
Flat LED
1
2
3 4
5
5
25