Electrical Connection - Leuze electronic CU411-RS4 Manual Del Usuario

EN
NOTICE
Check the function of the safety sensor before commissioning!
 Check the function of the safety sensor before commissioning (see
operating instructions

Electrical connection

The data about electrical supply of the RSL 410/RSL 420 applies to the voltage sup-
ply and all switching inputs/outputs (see
RSL 410/RSL 420, chapter 15 "Technical data").
NOTICE
 Make sure that the control voltage of the signal inputs corresponds to the infor-
mation on the RSL 410/RSL 420.
 Make sure that the voltage supply is suitable for the RSL 410/RSL 420.
NOTICE
Laying cables!
 Lay all connection cables and signal lines within the electrical installation
space or permanently in cable ducts.
 Lay the cables and lines so that they are protected against external damages.
 For further information: see EN ISO 13849-2, Table D.4.
Pin assignment
CU411-RS4 connection unit
SUB-D connector
11
of the RSL 410/RSL 420, chapter 11 "Check").
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
Original operating instructions
RSL 410/RSL 420
Cable
Core color
Blue
White
Brown
Black
Yellow
Violet
Gray/Pink
Red/Blue
-
-
Gray
Pink
Original
of the
Signal
OV (GND)
RES1
24 V
F1
A1
F2
F3
F4
-
-
OSSDA1
OSSDA2