Philips PowerPro FC8769 Manual Del Usuario página 14

English
14
1 To detach the filter grille, push the tab downwards (1) and pull the
grille towards you (2).
2 Pull out the Super Clean Air HEPA filter by pulling the tab towards
you.
3 Rinse the filter under a warm slow-running tap.
Never clean the filter with a brush.
4 Carefully shake the water from the surface of the filter. Let the filter
dry completely (at least 2 hours) before you put it back into the
vacuum cleaner.
Note: Cleaning does not restore the original colour of the filter, but does restore
its filtration power.
5 Click the filter back into place.
Note: Make sure the tab of the filter is located at the top.
6 Reattach the filter grille to the vacuum cleaner.
replacing the super clean air hEpa Filter
Caution: Use only original Philips filters.