Receiving And Inspecting The Equipment; Storage; Unpacking - Parker PCO2 Serie Manual Del Usuario

2.3 Receiving and Inspecting the Equipment

On receipt of the equipment carefully inspect the packaging for damage. If the packaging is damaged inform the delivery company immediately
and contact your local Parker Hannifin office.

2.3.1 Storage

If the equipment is to be stored prior to installation, do not remove it from the packaging. Ensure that it is stored in an upright position as
indicated by the arrows on the packaging.
Do not attempt to lift the equipment by yourself. It is recommended that the equipment be carried by a minimum of two persons or
transported on a pallet truck.
Note. The storage area should be secure and the environmental conditions should fall within those specified in the technical specification.If the
equipment is stored in an area where the environmental conditions fall outside of those specified, it is essential that it be moved to its final
location (installation site) and left to stabilise prior to unpacking. Failure to do this could cause condensing humidity and potential failure of the
equipment.

2.3.2 Unpacking

Remove the lid and all four sides of the packing crate (A). Lift the unit on to its feet using suitable slings and an overhead crane (B, C and D).
Carefully move the unit to its final location, using a forklift truck or pallet truck.
A A
C
B B
D
5