Publicidad
Idiomas disponibles
Idiomas disponibles
WWW.REPTILES-PLANET.COM
When
begin to flicker, the temperature for the daytime in the left side also
begin to flash, press
"▲" or "▼"
the "SET" key.
Then the humidity of the daytime begin to flicker, follow the same procedure by
pressing on
"▲" or "▼"
to adjust the data, then validate it by pressing briefly the
"SET" key until you have finished the four data. It's the same process to set the
night time temperature and humidity.
c. "Water Safe" prevention system of flood.
This security system is designed in case that the humidity measuring sensor bro-
ken and cannot detect that the humidity has already reached preset data. With a
traditional hygrostat, the humidifier will work constantly because of the broken
sensor; this will eventually overwater your terrarium or even lead to a flood in
your house.
If the security system is activated, it enforce a Maximum working time for the
humidifier, which is 6 times a day and maximum 1 minute for one time. (In to-
tal, 6 minutes for 24 hours maximum)
How to programmer the "Water Safe" security system?
Whatever climate you have finally chosen, after validating, you will see a small
icon like a little house with a drop of water inside begin to flash.
Press
"▲"
key, the icon will stop flash and appear constantly, this means that you
have chosen this security system.
or
Press
"▼"
key, the icon will disappear, this means that you have deactivated
the security function.
Finally, Press the "SET" key to validate all the setting and your thermostat begin
to work!
V. Warranty
REPTILES-PLANET warrants each Repti Control Pro to be free of defects in materi-
al and workmanship under normal use and service for 12 calendar months. The
obligation under this warranty is limited to the repair or replacement. No claim
shall be made due to accident or improper
dropping, etc.
The "safe water" is a beta function in our program. This means that the function
is still under test at the manufacturer. This function is not yet fully validated; its
operation is excluded from this warranty.
4
to adjust it and then validate it by pressing briefly
usage,
improper storage, accidental
REPTI CONTROL PRO
I. Paramètres principaux et description des caractéristiques du pro-
duit :
1.Puissance maximum autorisée : 3 x 500W0
2.Consommation: ≤ 3.5w
3.Taille de l'écran LCD : 9 x 3,6 cm
4.Plage de mesure de la température: 0-60 ℃
5.Plage de réglage de la température: 0-60 ℃
6.Précision de la température: + / -1 ℃
7.Plage de mesure de l'humidité: 0-90%
8.Plage de réglage de l'humidité:0-90%
9.Précision de l'humidité: + / -2%
10.Lorsqu'il y a une panne d'un capteur, l'écran LCD affiche « ---- », et décon-
necte automatiquement (par sécurité) les commandes.
11.Pour les réglages des valeurs, appuyez sur la touche "▲" ou la touche
"▼". Les valeurs vont s'incrémenter ou se réduire en conséquence. Avec une
pression brève, la valeur va se réduire ou s'incrémenter d'une seule décimale.
Pour incrémenter ou réduire plus rapidement les valeurs, faire une pression
plus soutenue, plus longue sur les touches "▲" ou "▼".
II. Présentation de votre écran LCD:
Affichage complet de votre écran LCD:
1
2
3
4
9
8
7
5
6
10
11
5
Publicidad
