Publicidad
Idiomas disponibles
Idiomas disponibles
Operating instructions for
Power supply unit NE-129/12V
Power supply unit NE-130/12V
Power supply unit NE-131/12V
NOTE: The power supply units are only suitable for use indoors,
in dry areas. They must not be used in rooms where
moisture is present, or outdoors.
NOTE: The 12VDC power supply units may only be used to supply
power to cameras and/or other devices which consume
electricity (note the relevant information regarding
maximum induced current). The supply voltage must
comply with the information given on the name plate that
is affixed to the housing.
Connection diagram
Installation of the power supply unit in the housing
M
Assembly bracket
N, G
Power supply unit, housing
S
Screws
a) NE-129/12V (#79661) in VTL-W/N2
N
(Art. No. 79661)
(Art. No. 79662)
(Art. No. 79663)
Insert power supply unit N into assembly bracket M.
Screw assembly bracket M, with power supply unit N, into the bored holes B in housing G.
The screws S are included in the accessories pack for the power supply unit.
M
Type
NE-129/12V
Art. No.
79661
For housing series
VTL-W/N2 (#79484),
VTL-D/N2 (#79485)
Input voltage
Output power
Secondary cable with free cable ends
Parts supplied
1 power supply unit, 2x screws
B
G
NE-130/12V
79662
VTL-WWA (#79488)
230VAC, 50Hz
12VDC, 1.25A (stabilised)
1 power supply unit,
Labelling
brown
230VAC input
blue
white
+12VDC output
black
-12VDC output
S
NE-131/12V
79663
EHL-W/ECLKA-NW
(#79658),
EHL-W/ECLKA
(#79653)
4x screws
N
Publicidad
