ampridge MightyMic Pro Manual Del Usuario página 7

Microphone Sensitivity Adjustment
The microphone has auto gain adjustment. This feature sets the ideal sensitivity while
listening to the speaking volume. Speak for about 5 seconds near the microphone to set the
ideal volume before recording.
Best performance is normally achieved using an external microphone with the sensitivity
set to High (H)
The default sensitivity is set to High when the device is shipped. The options are as follows:
● High (H): 0 dB (Typical for most microphones and situations)
● Medium (M): - 3 dB (Typical for some external microphones)
● Low (L): - 6 dB (Typical for high volume external microphones)
To change the sensitivity move the sensitivity switch on the side of the device. You may hear
increased noise in the M and L positions.
Note: You may hear some popping when changing sensitivity or microphone input options. This is
normal and not recommended to change while recording.
External Microphones
The MightyMic Pro supports connecting external microphones designed for Smartphone
headphone jacks such as the MightyMic series of microphones. The microphone must have 4 pins
on the plug in order to work correctly. Earbuds with switches (Like EarPods) and 3-pin
microphones made for camera's will not work with this device.
Simply insert the microphone into the headphone jack and move the switch from the internal
microphone setting (I) to the external microphone setting (E). To switch back to the internal
microphone you must move the switch back to the internal microphone setting (I) on the side of the
device.
Pair with two Phones
Use this function to receive phone calls from two different phones
● Pair the microphone to the first phone
● Press the "MF" button twice quickly to turn it into the pairing mode. The red and blue LED's
will begin to flash to indicate the pairing mode.
● Pair the microphone to the second phone
● The two phones are now paired with the microphone
Note: The microphone will pair with the last paired phone automatically when powered on again.
Please make sure to enable the Bluetooth function when powering on again.
Note: You can only play music or record from one phone with 2 connections
If you wish to disconnect the paired phone and connect another phone you can press and hold
the "MF" button for about 5 seconds. The microphone will turn into the pairing mode again and
the blue and red LED's will begin flashing again.
MightyMic Pro User Manual
6