■
FUNCTION SELECTION
Product On/Off
Infrared heat On/Off
Vibration On/Off
Bubbles On/Off
N.B. The diodes glow green to indicate which functions
and program are in operation.
After pouring water into the device, plug it in. The On/Off function
diode is red. Press the "On" button for the device. The diode that
was red changes to green.
Select the desired functions by pressing the corresponding
button/buttons. The diodes associated with these functions light
up with a green light.
Infrared heat:
Press the button once to turn on the infrared function. Press once
again to turn it off.
Vibrations:
Press the "vibration" button once. Press once again and program
2 (P2) starts up. Press a third time and program 3 (P3) starts up.
Press one more time to turn off the Vibration function.
Bubbles:
Press the "bubble" button once and program 1 (P1) starts up.
Press a second time and program 2 (P2) starts up. Press a third
time and program 3 (P3) starts up. Press once again to turn off
the Bubble function.
FOOT SPA WITH INFRARED HEAT AND BUBBLES
Instructions and warranty
Explanation of the differences between Programs 1, 2 and
3 for vibrations and bubbles:
Programs P1, P2 and P3 for vibrations and bubbles can be
described as follows:
Program 1: normal cycle
Maximum bubble and vibration strength
Program 2: alternating cycle
Alternating bubble and vibration strength
Program 3: random cycle
Random bubble and vibration strength
Turning the device off
When you press the On/Off button, all the functions in progress
stop. If you press the On/Off button once again, all the functions
previously selected start up again.
For your safety:
After 20 minutes of uninterrupted use, the equipment stops
automatically for 15 minutes to cool down.
While the equipment is stopped, none of the buttons will function.
The LED flashes red and green until the equipment has cooled
down completely, then goes to red to indicate that the product
is in stand-by mode. You can start activating any button.
■
WARRANTY
This product has a 2-year warranty for material and
manufacturing defects. During this period, these types of defects
will be repaired free of charge (proof of purchase must be
presented for any complaints made during the warranty period).
This warranty does not cover damage resulting from accidents,
improper use or negligence.
If you have a complaint, please contact the store where you
made your purchase first.
EN
8