HK Audio MB 5 Guia De Instalacion página 2

Tilting cabinets using the MB 5
1. Undo the nuts of bolts B and C
on the dividing plate (see figure 4).
2. Remove the back bolt (screw C) only
from the shaft.
While you are doing this,
be sure to support the cabinet
with your hand so that it cannot
tip forwards!
3. Select the hole that will give you the
desired angle of tilt and insert the bolt
into the shaft (see figure 5).
0° 5° 10° 15° 20° 25° 30°
A B C D
35° 40° 45° 50° 55° 60°
I G L
4. Tighten down all screws firmly.
5. Place the plastic covers onto the bolts'
heads and nuts (MB 5 in black only).
CAUTION:
Be sure to secure the speaker to prevent it
from falling off the wall mount using a suitable
safety catch such as the HK AUDIO safety bond
(item no.: 193643). On the back panel of
E F H
J M K
Figure 4
Figure 5
A
B
D
E
H
L
HK AUDIO speakers you will find a recessed
thread designed to take M10 eyebolts like
the HK AUDIO EB 10 (item no.: silver 193663;
black 193673) to fix the saftey bond.
Bolt C Bolt B
C
F
G
I
K
J
M