Brickcom Fixed Box Serie Guia De Instalacion página 11

II. Power over Ethernet (PoE) Connection
The Fixed Box camera is PoE compliant, so there are two options for
connecting the camera to a power and Ethernet source. The camera can
either be connected to a PoE-enabled switch or a non-PoE switch.
A. If using a PoE-enabled switch:
1) Use a single Ethernet cable to connect the camera to the
PoE-enabled switch.
B. If using a non-PoE switch:
1) Use a standard RJ-45 cable to connect the camera to a PoE
Injector.
2) Use a standard RJ-45 cable to connect the PoE Injector to the
non-PoE switch.
3) Use a standard power cable to connect the PoE Injector to a power
outlet.
11