Sinbo SVC 3467 Manual Del Usuario página 13

1. Switch off the vacuum cleaner and disconnect the plug
from the mains. To do this always pull on the plug and
not on the cable.
2. Remove the dust container.
3. Open the exhaust sponge cover.
4. Rinse the sponge filter under cold running water and
allow dry.
5. Put the exhaust air filter back into place.
6. Close the exhaust sponge cover.
Exhaust Sponge Filter
Transport and Storage
1. You can lift and carry the vacuum cleaner using the carrying handle. Never pull or lift
the vacuum cleaner by the cord.
2. Befor putting the vacuum away, rewind the cord. Switch off the socket, unplug, and
press the cord rewind button until the cord is fully rewound.
3. To save space, the vacuum can be stored upright on its end cover. The telescopic tube
can be hung on the vacuum cleaner by inserting the parking fixture into the vertical
parking holder.
4. Cleaning
Clean the vacuum cleaner by wiping it with a damp cloth.
You must not use any form of strong, solvent or abrasive cleaning agent.
Environmental tips
Once any electronic product is no longer functional, it should be disposed of in such a
way as to cause minimum environmental impact, in accordance with the regulations of
your local authority. In most cases you can take such products to your local recycling
station.
Features
1. Cyclone vacuum cleaner
2. With thermostat protection
3. Speed control
4. HEPA filter
5. Metal telescopic tube
6. Metal base floor brush
7. Dust Capacity: 3 L
8. Automatic cord rewinder
9. AC230V, 50Hz, 2000W
- 12 -