V-TAC VT-4538 Manual Del Usuario página 4

PARTS IDENTIFICATION
1. Fan Control
2. Air Outlet
3. Base
4. Timer(60 minutes) switch
5. 3 speed and Oscillation switch
OPERATING INSTRUCTION
1.Loosen the base locking nut
from the bottom of the unit by
turning it anticlockwise. Put it
down the length of the power cord.
2. Run the power cord through the
central gap between the two
halves of the un-assembled base.
3. Connect two halves by pushing
the plastic pegs on each half into
the corresponding slots on the
other half.
IMPORTANT: Make sure that the power cord passes through the guides on
the rear half of the base.
4. Pull up the base locking nut and tighten it clockwise.
ENGLISH