Publicidad
Idiomas disponibles
Idiomas disponibles
E E
N N
G G
E E
N N
G G
C C
O O
R R
R R
E E
C C
T T
P P
R R
C C
O O
R R
R R
E E
C C
T T
P P
R R
This appliance must be used only for the use for which it
is intended: as a bathroom scale.
Any other use is incorrect and therefore hazardous.
Polti S.p.A. may not be held liable for any damage or in-
jury resulting from incorrect or mistaken use.
W W
A A
R R
N N
W W
A A
R R
N N
Read the instructions carefully before using the appli-
ance and keep them for future reference.
This appliance is intended exclusively for domestic use,
and must not be used in hospitals or healthcare facili-
ties.
If the device is faulty or malfunctioning, do not attempt
to dismantle it yourself, but contact an authorised Polti
service centre.
If the appliance is dropped, have it inspected at an au-
thorised service centre.
The appliance has no parts requiring maintenance other
than the battery.
Wipe with a damp cloth after use. Do not use chemical
products or submerge it in water.
The scale always rounds off to the closest division. If
you weigh yourself twice and get two different readings,
this is because your weight is between the two read-
ings.
Do not keep the scale upright when not in use, as the
batteries will discharge in this position.
Do not subject the appliance to excessive vibration or
blows. Do not drop it onto the floor.
Do not leave the appliance where it will be exposed to
the weather.
Do not leave the appliance near a heat source.
Always take used batteries to collection containers.
Features
•
High precision weight sensor
•
Capacity of 150 Kg (330lb/24st)
•
Scanning of 100 g. (0.2lb)
•
Automatically comes on when the scale surface is
touched
•
Automatic zero setting
•
Automatic off
•
Overload indicator
•
Low battery indicator
P P
R R
E E
P P
A A
P P
R R
E E
P P
A A
Remove the insulating layer from the contacts of the 2
CR2032 lithium batteries (included).
Insert them in the battery compartment on the bottom
of the scale, following the + and – marks shown on the
S L I M M Y 3 0 0 0 D I G I T A L
L L
I I
S S
H H
L L
I I
S S
H H
O O
D D
U U
C C
T T
U U
S S
E E
O O
D D
U U
C C
T T
U U
S S
E E
I I
N N
G G
S S
I I
N N
G G
S S
R R
A A
T T
I I
O O
N N
R R
A A
T T
I I
O O
N N
appliance and checking that they remain in the correct
position.
Place the scale on a flat, stable surface to ensure accu-
rate weighing.
Touch the scale surface with your foot to turn it on. Wait
a few seconds for the following text to appear:
OK
The scale is now ready for weighing.
Step onto the scale and stand still while it is weighing,
trying to stay in the centre of the scale; wait for the
scale to calculate your weight.
When the scale has calculated your weight correctly,
the text OK will appear on the display and your weight
will appear as shown below:
(68 Kg + 300 g)
Warning: if you attempt to step onto the scale before it
shows "0", the following message will appear:
If this happens, simply step off the scale and turn it on
again as described above.
Automatic off.
When you step off the scale, it will go out automatically.
If you do not put any weight or a person on the scale for
a few seconds while the "0" is displayed, the scale will
go off automatically.
Overload indicator
If the scale is overloaded (over 150 kg), the display will
read:
10
U U
S S
E E
U U
S S
E E
0,0
68.3
Err
ERR
Publicidad
