Connect With Mi Home/Xiaomi Home App - Xiaomi Mi 360 Home Security Camera 2K Manual Del Usuario

Connect with Mi Home/Xiaomi Home App

This product works with Mi Home/Xiaomi Home app*. Control your device with
Mi Home/Xiaomi Home app.
To use this product, it is a must to download and install
the Mi Home/Xiaomi Home app. Scan the QR code to
download and install the app. You will be directed to the
connection setup page if the app is installed already. Or
search "Mi Home/Xiaomi Home" in the app store to
download and install it.
Make sure your phone has connected to the 2.4 GHz Wi-Fi.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow
prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The
name of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the
instructions based on the current app version.
Make sure the camera turns on and the network connection is stable during
connecting. The indicator is quickly blinking orange when waiting for a
connection, and turns into blue once the camera is successfully connected.
Restoring factory se ings
If the network connection or the Mi account that the camera is paired with
has been changed, you need to restore the factory se ings. Press and hold
the reset bu on for about three seconds. Once the indicator starts quickly
blinking orange, the factory se ings have been restored successfully. Then
you can reconnect the camera with the app.
Note: Restoring factory se ings will not delete the content on the microSD
card.
6