Publicidad
Legal Considerations
Video and audio surveillance can be regulated by
laws that vary from country to country. Check the
laws in your local region before using this product
for surveillance purposes.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of
any inaccuracies or omissions. Axis Communications
AB cannot be held responsible for any technical or
typographical errors and reserves the right to make
changes to the product and manuals without prior
notice. Axis Communications AB makes no warranty
of any kind with regard to the material contained
within this document, including, but not limited to,
the implied warranties of merchantability and fitness
for a particular purpose. Axis Communications AB
shall not be liable nor responsible for incidental
or consequential damages in connection with the
furnishing, performance or use of this material. This
product is only to be used for its intended purpose.
Intellectual Property Rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more
of the patents listed at www.axis.com/patent.htm and
one or more additional patents or pending patent
applications in the US and other countries.
Equipment Modifications
This equipment must be installed and used in
strict accordance with the instructions given in
the user documentation. This equipment contains
no user-serviceable components. Unauthorized
equipment changes or modifications will invalidate
all applicable regulatory certifications and approvals.
Trademark Acknowledgments
AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC
and VAPIX are registered trademarks or trademark
applications of Axis AB in various jurisdictions. All
other company names and products are trademarks or
registered trademarks of their respective companies.
Regulatory Information
Europe
This product complies with the applicable
CE marking directives and harmonized standards:
•
Electromagnetic Compatibility (EMC)
Directive 2004/108/EC. See Electromagnetic
Compatibility (EMC) on page 2 .
•
Low Voltage (LVD) Directive 2006/95/EC. See
Safety on page 3 .
•
Restrictions of Hazardous Substances (RoHS)
Directive 2011/65/EU. See Disposal and
Recycling on page 3 .
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
A copy of the original declaration of conformity
may be obtained from Axis Communications AB. See
Contact Information on page 3 .
Electromagnetic Compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
•
Radio frequency emission when installed
according to the instructions and used in its
intended environment.
•
Immunity to electrical and electromagnetic
phenomena when installed according to
the instructions and used in its intended
environment.
USA
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications. Operation of
this equipment in a residential area is likely to cause
harmful interference in which case the user will
be required to correct the interference at his own
expense. The product shall be properly grounded.
Canada
This digital apparatus complies with
CAN ICES-3 (Class A). The product shall be
properly grounded. Cet appareil numérique est
conforme à la norme NMB ICES-3 (classe A). Le
produit doit être correctement mis à la terre.
Europe
This digital equipment fulfills the requirements for RF
emission according to the Class A limit of EN 55022.
The product shall be properly grounded. Notice! This
is a Class A product. In a domestic environment this
product may cause RF interference, in which case the
user may be required to take adequate measures.
This product fulfills the requirements for immunity
according to EN 61000-6-1 residential, commercial
and light-industrial environments.
This product fulfills the requirements for immunity
according to EN 61000-6-2 industrial environments.
This product fulfills the requirements for immunity
according to EN 55024 office and commercial
environments
Australia/New Zealand
This digital equipment fulfills the requirements
for RF emission according to the Class A limit of
AS/NZS CISPR 22. The product shall be properly
grounded. Notice! This is a Class A product. In a
domestic environment this product may cause RF
interference, in which case the user may be required
to take adequate measures.
Japan
Publicidad
