Publicidad
F Monitor 2 y 2+
F Monitor settings using app from Google play sto
Make sure unit is running.
«Tools» (Herramientas)- > «Pair sensor»
Download the app from
Tools -> Pair sensor ,MAC
(Emparejar sensor), introduzca el número
Tools -> Pair sensor ,MAC
Google play. Open Filtermist
MAC situado en el lado del sensor y
number located on the side of
number located on the side of
pulse guardar. Si la operación es correcta,
app
the sensor
(optional F monitor
(optional F monitor
(optional F monitor
las luces de vibración y temperatura se
the sensor
(optional F monitor
2+)
encenderán
(F monitor 2+
2+)
Select airflow, press
calibrate ("C") and
El tiempo de mantenimiento puede
Maintenance time can be
Maintenance time can be
apagarse.
save(pen image).
switched off.
switched off.
Leave default setting (as shown) or
Leave default setting (as shown) or
alter limits as required and then
alter limits as required and then
press save (pen image).
press save (pen image).
opcional)
F Monitor settings usin
Make sure unit is running.
Deje el ajuste de fábrica (como
Download the app from
Scan and select F Monitor from list (code
se muestra) o modifique los
Leave default setting (as shown) or
Leave default setting (as shown) or
Google play. Open Filtermist
límites según sea necesario y, a
must match code on side of unit)
alter limits as required and then
continuación, pulse guardar (icono
alter limits as required and then
app
press save (pen image).
de lápiz).
press save (pen image).
Leave default
setting (as shown)
Select airflow, press
calibrate ("C") and
or alter limits as
required and then
save(pen image).
press save.
14
Same for
Leave d
maintenance.
setting (
"C" letter in
or alter
maintenance
required
settings are
press sa
for clearing
maintenance
time.
Scan a
E
i
must m
Publicidad
