Memorizing only the
desired stations
You can preset up to 18 FM stations (6 each for
FM1, FM2, and FM3), up to 12 AM stations (6
each for AM1 and AM2) in the order of your
choice.
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Press either side of (SEEK) to tune in the
station that you want to store on the
number button.
4
Press the desired number button ((1) to
(6)) for two seconds until "MEM"
appears.
The number button indication appears in
the display.
Note
If you try to store another station on the same
number button, the previously stored station will
be erased.
Receiving the memorized
stations
1
Press (SOURCE) repeatedly to select the
tuner.
2
Press (MODE) repeatedly to select the
band.
3
Press the number button ((1) to (6)) on
which the desired station is stored.
Tip
Press either side of (FLDR/PRESET) to receive the
stations in the order they are stored in the
memory (Preset Search Function).
If you cannot tune in a preset
station
Press either side of (SEEK) to search for
the station (automatic tuning).
Scanning stops when the unit receives a
station. Press either side of (SEEK)
repeatedly until the desired station is
received.
Note
If the automatic tuning stops too frequently, press
(MENU), then press either side of (FLDR/PRESET)
repeatedly until "LOCAL" (local seek mode) is
displayed. Then press the (+) side of (SEEK) to
select "LOCAL-ON." Press (ENTER).
Only the stations with relatively strong signals will
be tuned in.
Tips
• When you select the "LOCAL-ON" setting,
"L.SEEK" appears while the unit is searching for
a station.
• If you know the frequency of the station you
want to listen to, press and hold either side of
(SEEK) until the desired frequency appears
(manual tuning).
continue to next page t
19