F.Bertazzoni KGI90CONXA Instrucciones Para El Uso Y Mantenimiento página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

-
The equipment shall abide by the existing rules on the ventilation of closed spaces. Technically,
the air expelled shall not pass through the duct used for the discharge of smokes from appliances
using gas or any other fuel (central heating systems, etc...).
-
Ventilate the environment appropriately in case of a simultaneous operation of the exhaust hood
and any other equipment supplied by an energy source other than electricity so that the exhaust
hood will not draw gas compounds.
-
Attention! During the simultaneous operation of a suction-filtration exhaust hood and a heating
system independent of air (gas heaters, oil, coal, chimney, etc...), great attention has to be
placed so as to avoid that the exhaust hood does not absorb part of the air intended for the
combustion process since dangerous amounts of carbon monoxide may surge within the
premises, that would represent a life-threatening danger. When installing an exhaust hood joined
or connected to a fuel element such as a heater, chimney or local heating system, it is mandatory
to contact the producer or installer of such elements to obtain an optimal and risk-free operation.
-
It is necessary to maintain a depressurized environment of maximum 0.04 mbar. Such conditions
allow an excellent working of the exhaust hood. In order to achieve such environment a
permanent air intake is necessary in order to avoid air stagnation (it is advised to use a
ventilation grid for this purpose). Windows or doors shall not be used.
-
The electrical supply of the power network shall be stable and cope with the indicated electrical
standards, 220/240v AC, 50Hz. Should it be not stable and receive voltage variations in the
supply, intensity or frequency such as armonici, transistor, voltage dips, overloads, electrical
storms, etc..., the hood may show malfunctions or even breakdowns, and the repair would not be
covered by the warranty. In that case, the exhaust hood shall be disconnected and the company
must contact an electrician or electrical company in order to solve the supply problem.
-
The exhaust hood is a household appliance fit to a un elettrodomestico atto all'estrazione di fumi,
non può essere utilizzata come elemento di sostegno di oggetti o utensili.
-
In the constant effort to to improve our products, we reserve the right to make changes following
their enhancement to their technical, functional and aesthetic characteristics.
NORMS AND INSTALLATION TIPS:
(The entire installation process is exclusively reserved for qualified workers, installers or
authorized technical service).
Before proceeding with the installation, make sure that all components are in perfect conditions.
Otherwise, contact the vendor and do not proceed with the installation.
Once installed, the likely imperfections of the equipment such as scratches, impacts, etc..., will not be
covered by under warranty.
DO NOT REMOVE THE PROTECTIVE PLASTIC SHEET FROM THE HOOD UNTIL THE
PLEASE NOTE
INSTALLATION IS NOT COMPLETELY FINALIZED.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kgi120conxa

Tabla de contenido