LEGRAND Wiremold OFR Serie Instrucciones De Instalación página 2

6. ttach raceway cover.
7. ttach End Fitting cover using (4)
#6-32 round head screws.
Raceway Transition Fittings (OFR89-2400, OFR89-4000, OFR89-DS4000)
1. Using #8 fasteners, install base of Transition Fitting
directly on top of existing floor covering. The screw type
should be appropriate for the type of floor, which the
raceway is being installed on.
OFR89-2400
2
3
2
3. ttach Divider to Transition base in the desired orientation.
Fitting is provided with (3) dividers (Left, Right, Middle).
Select the divider that properly maintains division between
both raceways.
OFR89-2400
1
OFR89-4000
2. Slide OFR and wall mounted raceway bases onto
Transition Fitting connecting tabs and tighten #8-32
screws to secure.
OFR89-4000
4. ttach Raceway covers.
5. ttach Transition cover using (4) #6-32 round head screws.
OFR89-DS4000
2
OFR89-DS4000