Changing The Tool (See Figure B); Starting Operation - Bosch PSR 7,2 LI Manual Original

OBJ_BUCH-781-003.book Page 38 Wednesday, February 2, 2011 3:26 PM
38 | English
The battery charge-control indicator 5 indicates the
charging progress. During the charging procedure, the in-
dicator flashes green. The battery is fully charged when
the indicator lights up green continuously.
During the charging procedure, the handle of the machine
warms up. This is normal.
Disconnect the battery charger from the mains supply
when not using it for longer periods.
The power tool cannot be used during the charge proce-
dure; it is not defective when inoperative during the
charging procedure.
Observe the notes for disposal.

Changing the Tool (see figure B)

Do not use double-sided screwdriver blades that are
longer than 25 mm.
Insert the screwdriver bit 1 directly into the tool holder 2.
Operation

Starting Operation

Reversing the Rotational Direction (see figure C)
The rotational direction switch 9 is used to reverse the ro-
tational direction of the machine. However, this is not
possible with the On/Off switch 8 actuated.
2 609 005 113 | (2.2.11) Bosch Power Tools