Safety Precaution
This STB has been designed and manufactured to satisfy the international safety standards.
Please read the following safety precautions carefully before operating this receiver.
Main Supply:
Before operating, please check the units operating voltage is 90~250V AC 50/60Hz.
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord or
touch it with wet hand as this may result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no objects filled
with liquids, such as base, shall be placed on the apparatus.
Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the unit. Do not put
the receiver on soft furnishings or carpets. Do not expose the receiver to direct light or do not
place it near a heater or in humid conditions. Do not stack other electronic equipment on top
of the receiver.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver by a soft cloth or
mild solution of washing‐up liquid (no solvents).
Connection:
Disconnect the receiver from the mains when you connect it to satellite LNB or disconnect it
from LNB. Failure would possibly cause damage to the LNB.
Location:
Put the receiver indoor in order to avoid lightening, raining or sunlight.
Uncover:
Do not remove the cover, to reduce the risk of electric shock. Contact qualified and licensed
service personnel to repair the receiver, or contact your dealer.
1. Reference
1.1 Accessories
Users manual
Batteries
Remote Control Unit
Holder
Adapter
IR Extender
2