Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Channels
The baby monitor has eight channels each with 38 sub channels. This gives a total of
304 different channel combinations. The parent unit and baby unit must be tuned to the
same channel and sub channel in order to work. As transmission is open there is a risk
of interception and we recommend that sub channel 0 is NOT selected as this will allow
communication from all 38 sub channels. Other electronic equipment can interfere with
transmission. If interception or interference does occur, change the channels on both the
units or select another sub channel.
Parent Unit
Press
. The relevant channel flashes (large number).
1.
w
Scroll to the desired channel using
2.
Press
. The relevant sub channel flashes (little number in upper right corner).
3.
w
Scroll to the desired setting using
4.
Wait a few seconds until the display returns to standby mode.
5.
Baby Unit
Press
.
1.
MENU
Scroll to the desired channel using
2.
Press
.
3.
MENU
Scroll to the desired sub channel using
4.
Wait a few seconds until the display returns to standby mode.
5.
Range
In ideal conditions (no obstacles between the units) the range can reach up to 3 km.
Volume Control (Parent Unit)
On standby the volume can be adjusted using
Belt clip (Parent Unit)
The equipment includes a belt clip which is fitted to the back of the handset. The belt
clip enables the handset to be attached to a belt, waistband or similar. You can remove
the clip by lifting the small tab and pushing the clip upwards.
is shown on the display.
CH
is shown in the display.
Ct
English
/
.
v
V
/
.
v
V
/
.
v
V
/
.
v
V
/
.
v
V
Publicidad
Tabla de contenido
