Device Overview - Goclever TITANIUM Guia De Inicio Rapido

DEVICE: GOCLEVER TITANIUM
Optional GPS function

DEVICE OVERVIEW:

1. HDMI port
2. Magnet/Thimble port
3. USB port
4. OK/REC button
5. MODE button
6. MENU button
7. UP button
8. DOWN button
9. Power button
10. TF slot „A"
11. TF slot „A" led
indicator
12. TF slot „B"
13. TF slot „B" led
indicator"
14. Reset button
15. Microphone
OPERATION:
TURNING ON/OFF
Press the power button once to turn on the device.
Blue light indicator will turn on. Press the power but-
ton again to turn off the device. Blue light indicator
will turn off.
Note: low battery icon will be displayed before shut-
ting down the device.
CHARGING THE BATTERY
There are three ways of charging the battery:
- Using the AC adapter
- Using a USB port
- Using car cigarette lighter power supply
PLACING A MICRO SD CARD
Place the micro SD card into the memory card slot.
Press it until you hear a click sound. You can insert 2
memory cards at once (TF slot A and TF slot B). When
the first card is full, the device will automatically swi-
tch to the second card.
G - SENSOR FUNCION
Select "off/high/medium/low". The video will be loc-
ked when the device will detect an impact.
MOTION DETECT
Turn on the motion detect function in the menu. The device will automatically start the recording when it detects any movement
in range (20 cm).
VIDEO RECORDING AND PHOTO TAKING
Select mode using a mode button to select the video or photo mode. Press OK to start recording in video mode. Press OK again
to stop the recording. Press OK to take a photo in photo mode. Press MENU button in video or photo mode to enter the corre-
sponding settings menu.
Power button ON/OFF
MENU button Main menu
MODE button Switch operation mode
/corresponding menu
REC button Start/pause
UP key Up/zoom in
DOWN key Down/zoom out
WARNING: Appearance
of the device and buttons
location can vary from your
device.
GOCLEVER | Quick Start Guide | GB
1
9
10 11
BASIC OPERATION
Press MODE button to switch between video, photo and play-
back mode.
Press MENU button twice to enter system setting menu:
Select format to delete all data on your SD card
Select language to choose the system language
Select reset to restore system settings to default values
Select frequency: 50/60 Hz
Select date setup to set a date and time
2 3 4
12 13 14 15
2
5
6
7
8